Tecnocraft Composites

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the JDM 2002-2006 Integra Type-R's factory wing. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high pressure zone on the top side of the wing generating down-force.

Note: This item will only fit the OEM 02-06 Integra Type-R wing.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

Add that last finishing touch to your engine bay with these all new Password:JDM fender washers! Offered in anodized black, blue, gold, purple, red, gunmetal, silver, green, pink and orange these fender washers feature the Password:JDM Kenji logo. All Password:JDM fender washers are constructed from aircraft grade aluminum and are matched up with long lasting stainless steel bolts.

The Password:JDM Fender Washer Kits include 6Mx20 stainless steel bolts. The fender washers will fit any 10mm bolt hole under the hood of your Honda. The 6Mx20 bolts is recommended for all parts under your hood such as fenders, headlights, bumpers, etc.

Please note that each pack comes with 5 washers and bolts

**Only Authorized Seller For Password:JDM**


Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the Integra Type-R's factory wing. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter / canards, you will be able to enhance the overall aerodynamic characteristics of your Integra Type-R 2DR.

Note: This item will only fit the OEM 94-01 Integra Type-R wing.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the 99-00 Civic Si factory wing. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high-pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter and canards, you will be able to enhance the overall aerodynamic characteristics of your EMI Civic Si 2DR.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

Password:JDM has done it again! We have crafted this exotic, race inspired, dry Carbon Kevlar spark plug covers to spice up the look of your engine bay! Like all of our Dry Carbon parts we manufacture, this plug cover has been precision crafted for a perfect fitment every time. We have used a fade resistant resin during the manufacturing process to ensure this plug cover will always look & function as good as the day you bought it! Fits any B-Series VTEC equipped Honda vehicle.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order, a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.

The Password:JDM Carbon Fiber Airbag Trays have been described as a work of art! We showed this off and everyone only had nice things to say! But to us, it's just another product that we should have made available a long time ago. Our Password:JDM Carbon Fiber Airbag Trays are a direct replacement! It's perfect for those who choose to have their airbag removed for safety reasons on road courses or when drag racing.

Crafted from aerospace grade 2x2 twill Carbon Fiber and 100% high solid epoxy resin, our bags trays are designed to fit the USDM vehicles without any modification to your stock dash. What this means is that you can retain your factory airbag and reinstall it later if you need to. The Password:JDM Carbon Fiber Airbag Trays are truly plug & play! Installation takes less than 20 minutes, and requires only the basic tools that every car enthusiast should have! A quality fit and finish is guaranteed.

The Password:JDM Carbon Fiber Airbag Tray is a nice finishing touch to any vehicle that's show/race worthy. These are high quality pieces crafted here in the States. Like all of Password:JDM's products, these are produced one at a time. The exceptionally consistent quality you would expect from us is delivered each and every single time.

Available fitments:


DC '94-'01 Integra

Modifying, disconnecting, or removing airbag systems, components and/or hardware should only be done on vehicles used purely for race/show purpose only. In some countries, it is illegal to tamper or modify any portion of the supplemental restraint system (SRS). Please check with your local, state and/or federal laws pertaining to automotive SRS systems. Password does not assume any liability for damages resulting from the use of our Airbag trays. End users assumes all liabilities when using this product. Our Airbag trays are intended strictly for off-road racing use only!!!

Mounting requires the use of some sort of bonding agent such as double sided tape along the edges or a silicon adhesive. Removal of the factory airbag (SRS) should be done by a trained and certified professional who knows how to disconnect the battery and SRS control unit prior to any airbag removal.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer:
All Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a finger print, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable. Such minor imperfections are race industry standard and considered acceptable. Therefore it is NOT considered to be defective.

All Password:JDM Dry Carbon/Kevlar products require professional installation. Minor adjustments might be necessary. This is part of the normal body work and installation process. Password:JDM has made all efforts to produce its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There will be absolutely no returns on painted products.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item is a special order and will ship out 2-3 weeks from the original purchase. Please contact support@tecnocraftcomposites.com to special order.

Revitalize your PasswordJDM part with a fresh, new badge.

The Password:JDM Dry Carbon Fiber Gurney Flap / Wickerbill is a short lip that protrudes upward from the upper trailing edge of the 2012-2013 Civic Si 2DR's factory wing. It’s used to enhance the wing’s down-force characteristics by separating the airflow on the back side of the wing, primarily that which comes over the top of the wing. The result creates a localized high-pressure zone on the top side of the wing generating down-force.

When used in conjunction with a functional front splitter and canards, you will be able to enhance the overall aerodynamic characteristics of your 2012+ Civic Si 2DR.

Care instructions: Please note that these parts are finished in natural dry carbon fiber, which does not include a UV-protectant clear-coat finish. We do not recommend adding a clear coat to our products. We instead recommend applying a coat of Spray-on Wax or Ceramic Coat to prevent water spots / white marks from appearing after rain or car wash.

Disclaimer: All Tecnocraft Composites and Password:JDM Dry Carbon/Kevlar products are hand crafted and as unique as a fingerprint, no two items will be exactly identical. Small imperfections such as wavy weaves, small bubbles and resin blemishes will be inevitable, and they do not affect performance. Such minor imperfections are race industry standard and considered acceptable.

Additional shipping charges will apply for Canada, Alaska, and Hawaii customers. You will not be billed for shipping at the time of purchase. After we have received your order a sales representative will contact you with information on the shipping charges.

This item usually ships out in 3-5 business days from the original purchase date.